Scientific production

2019

► A Laouissi, MA Yallese, A Belbah, A Khellaf, A Haddad - Comparative study of the performance of coated and uncoated silicon nitride (Si 3 N 4) ceramics when machining EN-GJL-250 cast iron using the RSM method and 2D and 3D roughness functional parameters.  Journal of the Brazilian Society of Mechanical Sciences …, 2019. https://link.springer.com/article/10.1007/s40430-019-1708-9

► A Laouissi, MA Yallese, A Belbah, S Belhadi… - Investigation, modeling, and optimization of cutting parameters in turning of gray cast iron using coated and uncoated silicon nitride ceramic tools. Based on ANN, RSM, and GA optimization.  The International Journal of Advanced Manufacturing …, 2019. https://link.springer.com/article/10.1007/s00170-018-2931-8.

► R Saidi, BB Fathallah, T Mabrouki, S Belhadi… - Correction to: Modeling and optimization of the turning parameters of cobalt alloy (Stellite 6) based on RSM and desirability function.  The International Journal of Advanced Manufacturing …, 2019. https://link.springer.com/article/10.1007/s00170-018-3037-z

► R Saidi, BB Fathallah, T Mabrouki, S Belhadi… -Modeling and optimization of the turning parameters of cobalt alloy (Stellite 6) based on RSM and desirability function.  The International Journal of Advanced Manufacturing …, 2019. https://link.springer.com/article/10.1007/s00170-018-2816-x

► A Zerti, MA Yallese, O Zerti, M Nouioua, R Khettabi -Prediction of machining performance using RSM and ANN models in hard turning of martensitic stainless steel AISI 420.  Proceedings of the Institution of Mechanical Engineers …, 2019. https://journals.sagepub.com/doi/abs/10.1177/0954406218820557.

► B Fathallah, R Saidi, C Dakhli, S Belhadi, M Yallese. Mathematical modelling and optimization of surface quality and productivity in turning process of AISI 12L14 free-cutting Steel.  - International Journal of Industrial Engineering …, 2019. http://m.growingscience.com/beta/ijiec/3205-mathematical-modelling-and-optimization-of-surface-quality-and-productivity-in-turning-process-of-aisi-12l14-free-cutting-steel.html

► H Aouici, M Elbah, A Benkhelladi, B Fnides…Comparison on various machinability aspects between mixed and reinforced ceramics when machining hardened steels.  - Mechanics & Industry, 2019. https://www.mechanics-industry.org/articles/meca/abs/2019/01/mi150047/mi150047.html

► A Zerti, MA Yallese, I Meddour, S Belhadi, A Haddad…Modeling and multi-objective optimization for minimizing surface roughness, cutting force, and power, and maximizing productivity for tempered stainless steel AISI 420 in turning operations. - The International Journal of Advanced Manufacturing …, 2019. https://link.springer.com/article/10.1007/s00170-018-2984-8

► MK Babouri, N Ouelaa, T Kebabsa, A Djebala. Application of the cyclostationarity analysis in the detection of mechanical defects: comparative study  The International Journal of Advanced Manufacturing …, 2019. https://link.springer.com/article/10.1007/s00170-019-03652-y

► M Guebailia, N Ouelaa. The Evaluation of the Dynamic Response of the Moving Exciter Due to the Irregularities of the Slab.  - Computational Methods and Experimental Testing In …, 2019. https://link.springer.com/chapter/10.1007/978-3-030-11827-3_10

► MK Babouri, N Ouelaa, MC Djamaa, A Djebala. Prediction of Optimal Lifetime of the Tool’s Wear in Turning Operation of AISI D3 Steel Based on the a New Spectral Indicator SCG. … - Computational Methods and Experimental Testing In …, 2019. https://link.springer.com/chapter/10.1007/978-3-030-11827-3_9

► ML Bouhalais, A Djebala, N Ouelaa . Rolling Bearing Local Fault Detection During a Run-Up Test Using Wavelet-Filtered CEEMDAN Envelopes - Computational Methods and Experimental Testing In …, 2019

https://link.springer.com/chapter/10.1007/978-3-030-11827-3_11

2018

► ML Bouhalais, A Djebala, N Ouelaa, MK Babouri. CEEMDAN and OWMRA as a hybrid method for rolling bearing fault diagnosis under variable speed.  - The International Journal of Advanced Manufacturing 2018.  https://link.springer.com/article/10.1007/s00170-017-1044-0

► Babouri MK, Ouelaa N. Analyse vibratoire de l'usure des outils de coupe: Surveillance de l'évolution de l'usure d'un outil de coupe en tournage. Éditions universitaires européennes; 2018.

► T Kebabsa, N Ouelaa, A Djebala - Experimental vibratory analysis of a fan motor in industrial environment. The International Journal of Advanced Manufacturing …, 2018

https://link.springer.com/article/10.1007/s00170-018-2391-1

► ZERTI, ADERRAHMEN, et al. "Modeling and multi-objective optimization for minimizing surface roughness, cutting force, and power, and maximizing productivity for tempered stainless steel AISI 420 in turning operations." The International Journal of Advanced Manufacturing Technology (2019): 1-23. https://link.springer.com/article/10.1007/s00170-018-2984-8

► O Zerti, M Yallese, A Zerti, S Belhadi, F Girardin - Simultaneous improvement of surface quality and productivity using grey relational analysis based Taguchi design for turning couple (AISI D3 steel/mixed ceramic tool (Al2O3+ TiC)).- International Journal of Industrial Engineering …, 2018 http://growingscience.com/beta/ijiec/2606-simultaneous-improvement-of-surface-quality-and-productivity-using-grey-relational-analysis-based-taguchi-design-for-turning-couple-aisi-d3-steel-mixed-ceramic-tool-al2o3-tic.html.

► L Bouzid, S Berkani, M Yallese, F Girardin, T Mabrouki - Estimation and optimization of flank wear and tool lifespan in finish turning of AISI 304 stainless steel using desirability function approach- International Journal of Industrial Engineering …, 2018. http://growingscience.com/beta/ijiec/2650-estimation-and-optimization-of-flank-wear-and-tool-lifespan-in-finish-turning-of-aisi-304-stainless-steel-using-desirability-function-approach.html.

► I Meddour, MA Yallese, H Bensouilah, A Khellaf… Prediction of surface roughness and cutting forces using RSM, ANN, and NSGA-II in finish turning of AISI 4140 hardened steel with mixed ceramic tool- The International Journal of Advanced Manufacturing …, 2018. https://link.springer.com/article/10.1007/s00170-018-2026-6.

► A Labidi, H Tebassi, S Belhadi, R Khettabi, MA Yallese - Cutting Conditions Modeling and Optimization in Hard Turning Using RSM, ANN and Desirability Function- Journal of Failure Analysis and Prevention, 2018. https://link.springer.com/article/10.1007/s11668-018-0501-x.

2017

►KHETTABI, Riad, NOUIOUA, Mourad, DJEBARA, Abdelhakim, et al. Effect of MQL and dry processes on the particle emission and part quality during milling of aluminum alloys. The International Journal of Advanced Manufacturing Technology, 2017, vol. 92, no 5-8, p. 2593-2598. https://link.springer.com/article/10.1007/s00170-017-0339-5

► BABOURI, Mohamed Khemissi, OUELAA, Nouredine, DJAMAA, Mohamed Cherif, et al. Prediction of Tool Wear in the Turning Process Using the Spectral Center of Gravity. Journal of Failure Analysis and Prevention, 2017, vol. 17, no 5, p. 905-913..  https://link.springer.com/article/10.1007/s11668-017-0319-y

► BOUZIANI, Ryad et OUELAA, Noureddine. Simulation of the dynamic behavior of a rotor subject to base motion under variable rotational speed. Mechanics & Industry, 2017, vol. 18, no 3, p. 308.  https://www.mechanics-industry.org/articles/meca/abs/2017/03/mi160044/mi...

► GUEBAILIA, Moussa et OUELAA, Nouredine. THE DYNAMIC RESPONSE OF A CONTINUOUS PLATE FOR DIFFERENT SURFACE STATES. DIAGNOSTYKA, 2017, vol. 18, no 4, p. 1641-6414. http://www.diagnostyka.net.pl/The-dynamic-response-of-a-continuous-plate...

► MOHAMED KHEMISSI, BABOURI, OUELAA, Nouredine, et DJEBALA, Abderrazek. Application of the Empirical Mode Decomposition method for the prediction of the tool wear in turning operation. Mechanics, 2017, vol. 23, no 2, p. 315-320. http://mechanika.ktu.lt/index.php/Mech/article/view/8971

► YOUNES, Ramdane, OUELAA, Nouredine, HAMZAOUI, Nacer, et al. Perceptual Study of Simple and Combined Gear Defects. In : Applied Mechanics, Behavior of Materials, and Engineering Systems. Springer, Cham, 2017. p. 219-225. https://link.springer.com/chapter/10.1007%2F978-3-319-41468-3_17

► OUELAA, Nouredine, YOUNES, Ramdane, HAMZAOUI, Nacer, et al. Experimental Study of Real Gear Transmission Defects Using Sound Perception. In : Applied Mechanics, Behavior of Materials, and Engineering Systems. Springer, Cham, 2017. p. 267-274. https://link.springer.com/chapter/10.1007/978-3-319-41468-3_21

► BABOURI, Mohamed Khemissi, OUELAA, Nouredine, DJEBALA, Abderrazek, et al. Prediction of Cutting Tool’s Optimal Lifespan Based on the Scalar Indicators and the Wavelet Multi-resolution Analysis. In : Applied Mechanics, Behavior of Materials, and Engineering Systems. Springer, Cham, 2017. p. 299-310. https://link.springer.com/chapter/10.1007/978-3-319-41468-3_24

► KEBABSA, Tarek, OUELAA, Nouredine, ANTONI, Jerome, et al. Fault Diagnosis Through the Application of Cyclostationarity to Signals Measured. In : Applied Mechanics, Behavior of Materials, and Engineering Systems. Springer, Cham, 2017. p. 251-266. https://link.springer.com/chapter/10.1007/978-3-319-41468-3_20

► GUEBAILIA, Moussa et OUELAA, Nouredine. Free Vibration of a Multi-span Road Bridge Supported by Point Elastic Supports. In : International Conference Design and Modeling of Mechanical Systems. Springer, Cham, 2017. p. 91-96. https://link.springer.com/chapter/10.1007/978-3-319-66697-6_10

► YOUNES, Ramdane, OUELAA, Nouredine, HAMZAOUI, Nacer, et al. Experimental Study of Combined Gear and Bearing Faults by Sound Perception. In : Advances in Acoustics and Vibration. Springer, Cham, 2017. p. 145-151. https://books.google.dz/books?id=QIX2DAAAQBAJ&pg=PA145&lpg=PA145&dq=Expe...

► NOUIOUA, Mourad, YALLESE, Mohamed Athmane, KHETTABI, Riad, et al. Investigation of the performance of the MQL, dry, and wet turning by response surface methodology (RSM) and artificial neural network (ANN). The International Journal of Advanced Manufacturing Technology, 2017, vol. 93, no 5-8, p. 2485-2504. https://www.scopus.com/authid/detail.uri?authorId=16641654800

► AOUICI, H., KHELLAF, A., SMAIAH, S., et al. Comparative assessment of coated and uncoated ceramic tools on cutting force components and tool wear in hard turning of AISI H11 steel using Taguchi plan and RMS. Sādhanā, 2017, vol. 42, no 12, p. 2157-2170. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►HAMLAOUI, N., AZZOUZ, S., CHAOUI, K., et al. Machining of tough polyethylene pipe material: Surface roughness and cutting temperature optimization. The International Journal of Advanced Manufacturing Technology, 2017, vol. 92, no 5-8, p. 2231-2245. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►SELAIMIA, Abdel-Ali, YALLESE, Mohamed Athmane, BENSOUILAH, Hamza, et al. Modeling and optimization in dry face milling of X2CrNi18-9 austenitic stainless steel using RMS and desirability approach. Measurement, 2017, vol. 107, p. 53-67. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►NOUIOUA, Mourad, YALLESE, Mohamed Athmane, KHETTABI, Riad, et al. Comparative assessment of cooling conditions, including MQL technology on machining factors in an environmentally friendly approach. The International Journal of Advanced Manufacturing Technology, 2017, p. 1-16. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►TEBASSI, Hamid, YALLESE, Mohamed Athmane, BELHADI, Salim, et al. Quality-productivity decision making when turning of Inconel 718 aerospace alloy: A response surface methodology approach. International Journal of Industrial Engineering Computations, 2017, vol. 8, no 3, p. 347-362. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►CHABBI, A., YALLESE, M. A., NOUIOUA, M., et al. Modeling and optimization of turning process parameters during the cutting of polymer (POM C) based on RSM, ANN, and DF methods. The International Journal of Advanced Manufacturing Technology, 2017, vol. 91, no 5-8, p. 2267-2290. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►ZERTI, Oussama, YALLESE, Mohamed Athmane, KHETTABI, Riad, et al. Design optimization for minimum technological parameters when dry turning of AISI D3 steel using Taguchi method. The International Journal of Advanced Manufacturing Technology, 2017, vol. 89, no 5-8, p. 1915-1934. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►BENLAHMIDI, S., AOUICI, H., BOUTAGHANE, F., et al. Design optimization of cutting parameters when turning hardened AISI H11 steel (50 HRC) with CBN7020 tools. The International Journal of Advanced Manufacturing Technology, 2017, vol. 89, no 1-4, p. 803-820. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►KHELLAF, A., AOUICI, H., SMAIAH, S., et al. Comparative assessment of two ceramic cutting tools on surface roughness in hard turning of AISI H11 steel: including 2D and 3D surface topography. The International Journal of Advanced Manufacturing Technology, 2017, vol. 89, no 1-4, p. 333-354. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►KEBLOUTI, Ouahid, BOULANOUAR, Lakhdar, AZIZI, Mohamed Walid, YALLESE M.A. Effects of coating material and cutting parameters on the surface roughness and cutting forces in dry turning of AISI 52100 steel. Structural Engineering and Mechanics, 2017, vol. 61, no 4, p. 519-526. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►KEBLOUTI, Ouahid, BOULANOUAR, Lakhdar, AZIZI, M., YALLESE M.A. Modeling and multi-objective optimization of surface roughness and productivity in dry turning of AISI 52100 steel using (TiCN-TiN) coating cermet tools. International Journal of Industrial Engineering Computations, 2017, vol. 8, no 1, p. 71-84. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►BOUZID, Lakhdar, YALLESE, Mohamed Athmane, BELHADI, Salim, et al. Tool Life Evaluation of Cutting Materials in Turning of X20Cr13 Stainless Steel. In : Applied Mechanics, Behavior of Materials, and Engineering Systems. Springer International Publishing, 2017. p. 447-452. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►ZERTI, Oussama, YALLESE, Mohamed Athmane, BELHADI, Salim, and BOUZID Lakhdar. Taguchi Design of Experiments for Optimization and Modeling of Surface Roughness When Dry Turning X210Cr12 Steel. In : Applied Mechanics, Behavior of Materials, and Engineering Systems. Springer International Publishing, 2017. p. 275-288. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►TEBASSI, Hamid, YALLESE, Mohamed Athmane, MEDDOUR, Ikhlas, et al. On the Modeling of Surface Roughness and Cutting Force when Turning of Inconel 718 Using Artificial Neural Network and Response Surface Methodology: Accuracy and Benefit. Periodica Polytechnica. Engineering. Mechanical Engineering, 2017, vol. 61, no 1, p. 1. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►FNIDES, Mohamed, YALLESE, M., KHATTABI, Riad, et al.Modeling and optimization of surface roughness and productivity thru RSM in face milling of AISI 1040 steel using coated carbide inserts. International Journal of Industrial Engineering Computations, 2017, vol. 8, no 4, p. 493-512. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►CHABBI, Amel, YALLESE, Mohamed Athmane, MEDDOUR, Ikhlas, et al. Predictive modeling and multi-response optimization of technological parameters in turning of Polyoxymethylene polymer (POM C) using RSM and desirability function. Measurement, 2017, vol. 95, p. 99-115. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►SAIL, K., AOUICI, H., HASSANI, S., et al. Influence of tribological parameters on S335 steel filing Ti–W–N in dry sliding wear: Prediction model and sliding condition optimization. The International Journal of Advanced Manufacturing Technology, 2017, vol. 92, no 9-12, p. 4057-4071. https://www.scopus.com/authid/detail.uri?authorId=24176841200

►AMEUR, M. F., HABAK, M., KENANE, M., AOUICI, Het al. Machinability analysis of dry drilling of carbon/epoxy composites : cases of exit delamination and cylindricity error. The International Journal of Advanced Manufacturing Technology, 2017, vol. 88, no 9-12, p. 2557-2571. https://www.scopus.com/authid/detail.uri?authorId=24176841200

►KHOUALDIA, Tarek, HADJADJ, Aoul Elias, BOUACHA, Khaider, et al. Multi-objective optimization of ANN fault diagnosis model for rotating machinery using grey rational analysis in Taguchi method. The International Journal of Advanced Manufacturing Technology, 2017, vol. 89, no 9-12, p. 3009-3020. https://www.scopus.com/authid/detail.uri?authorId=35232647200

►KHELLAF, Ahmed, YALLESE, Mohamed, BOUTABBA, Smail, et al. Mathematical modeling and multi-objective optimization of technological parameters in Hard Turning operation using RSM and Genetic Algorithmic Approach. S1-Procédés de fabrication et mise en forme par grandes déformations, 2017. http://documents.irevues.inist.fr/handle/2042/63108

►NOUIOUA, M., YALLESE, M. A., KHETTABI, R., et al.Optimization of Machining Process During Turning of X210Cr12 Steel Under MQL Cooling as a Key Factor in Clean Production. In : International Conference Design and Modeling of Mechanical Systems. Springer, Cham, 2017. p. 855-863. https://link.springer.com/chapter/10.1007/978-3-319-66697-6_83

►BENSOUILAH, Nadjia, FISLI, Hassina, BENSOUILAH, Hamza, et al. Host-guest complex of N-(2-chloroethyl), N-nitroso, N′, N′-dicyclohexylsulfamid with β-cyclodextrin: Fluorescence, QTAIM analysis and structure-chemical reactivity. Journal of Molecular Structure, 2017, vol. 1146, p. 179-190. https://www.sciencedirect.com/science/article/pii/S002228601730755X

► BENSOUILAH, Nadjia, BOUTEMEUR-KHEDDIS, Baya, BENSOUILAH, Hamza, et al. Host-guest complex of nabumetone: β-cyclodextrin: quantum chemical study and QTAIM analysis. Journal of Inclusion Phenomena and Macrocyclic Chemistry, 2017, vol. 87, no 1-2, p. 191-206. https://link.springer.com/article/10.1007/s10847-016-0690-4

► BOUCHERIT, Hamid, BOU‐SAÏD, Benyebka, et LAHMAR, Mustapha. The effect solid particle lubricant contamination on the dynamic behavior of compliant journal bearings. Lubrication Science, 2017, vol. 29, no 7, p. 425-439.  https://onlinelibrary.wiley.com/doi/abs/10.1002/ls.1378

2016

►YOUNES, Ramdane, OUELAA, Nouredine, HAMZAOUI, Nacer, et al. Experimental Study of Combined Gear and Bearing Faults by Sound Perception. In : Advances in Acoustics and Vibration. Springer, Cham, 2017. p. 145-151. https://link.springer.com/chapter/10.1007/978-3-319-41459-1_14

►   M.C. DJAMAA, M.KHECHANA, S.BOUCHERIT. Application of short-term fractional Fourier transform to identify both chatter and structural damage from cutting force signals. Australian Journal of Basic and Applied Sciences 10(15) October 2016, p.60-67

► FNIDES, Brahim, YALLESE, Mohamed Athmane, MABROUKI, Tarek, et al. Surface roughness model in turning hardened hot work steel using mixed ceramic tool. Mechanics, 2016, vol. 77, no 3, p. 68-73.

► BENSOUILAH, Hamza, AOUICI, Hamdi, MEDDOUR, Ikhlas, YALLESE, Mohamed Athmane, et al. Performance of coated and uncoated mixed ceramic tools in hard turning process. Measurement, 2016, vol. 82, p. 1-18.

► BELHADI, Salim, KADDECHE, Mounia., CHAOUI, Kamel and  YALLESE, Mohamed Athmane. Machining Optimization of HDPE Pipe Using the Taguchi Method and Grey Relational Analysis. International Polymer Processing, 2016, vol. 31, no 4, p. 491-502.

► TEBASSI, Hamid, YALLESE, Mohamed Athmane, MEDDOUR, Ikhlas, et al. On the Modeling of Surface Roughness and Cutting Force when Turning of Inconel 718 Using Artificial Neural Network and Response Surface Methodology: Accuracy and Benefit. Periodica Polytechnica Mechanical Engineering, 2016, vol. 61, no 1, p. 1-11.

► ZERTI, Oussama, YALLESE, Mohamed Athmane, KHETTABI, Riad, et al. Design optimization for minimum technological parameters when dry turning of AISI D3 steel using Taguchi method. The International Journal of Advanced Manufacturing Technology, 2016, p. 1-20.

►ELBAH, Mohamed, AOUICI, Hamdi, MEDDOUR, Ikhas, YALLESE, Mohamed Athmane, et al. Application of response surface methodology in describing the performance of mixed ceramic tool when turning AISI 4140 steel. Mechanics & Industry, 2016, vol. 17, no 3, p. 309.

2015

► T.KEBABSA, N.OUELAA, A.JEROME, M.C. DJAMAA, R.KHETTABI, A. DJEBALA: Experimental study of a turbo-alternator in industrial environment using cyclostationarity analysis.  The International Journal of Advanced Manufacturing Technology

ISSN: 0268-3768 (Print) 1433-3015 (Online)

http://link.springer.com/article/10.1007/s00170-015-7083-5#page-1

►V. SONGMENE, R.KHETTABI, M.VIENS, J.KOUAM, S.HALLE, F.MORENCY,   J.MASOUNAVE, A.DJEBARA: Nanoparticle measurement, control and characterization. Procedure applied to machining and mechanical friction. 

 ► M.C. DJAMAA A, N. OUELAA A, C. PEZERAT B, J.L. GUYADER C: Sound source localization by an inverse method using the measured dynamic response of a cylinder. Applied Acoustics 88 (2015) 22–29

http://www.sciencedirect.com/science/article/pii/S0003682X14001960

► A.REZAIGUIA, N.OUELAA, D.F.LAEFER, S.GUENFOUD : Dynamic amplification of a multi-span, continuous orthotropic bridge deck under vehicular movement. Journal of ingineering Structures, 2015 Elseiver volume 100 – page718-730.

http://www.sciencedirect.com/science/article/pii/S0141029615004204

► S.ABAINIA, N.OUELAA: Experimental study of the combined influence of the tool geometry parameters on the cutting forces and tool vibrations. The International Journal of Advanced Manufacturing Technology http://link.springer.com/article/10.1007/s00170-015-6885-9#page-1

►  A.DJEBALA,  M.K.BABOURI,  N.OUELAA: Rolling bearing fault detection using a hybrid method based on Empirical Mode Decomposition and optimized wavelet multi-resolution analysis. International Journal of Advanced Manufacturing Technology

http://link.springer.com/article/10.1007/s00170-015-6984-7#page-1

► M.K BABOURI, N.OUELAA, A.DJEBALA: Experimental study of tool life transition and wear monitoring in turning operation using a hybrid method based on wavelet multi-resolution analysis and empirical mode decomposition. "Springer-Verlag London 2015 The International Journal of Advanced Manufacturing Technology". http://link.springer.com/article/10.1007/s00170-015-7530-3#page-1

► I.MOUMENE, N.OUELAA: Application of the wavelets multiresolution analysis and the high-frequency resonance technique for gears and bearings faults diagnosis. Springer-Verlag London 2015 The International Journal of Advanced Manufacturing Technology

http://link.springer.com/article/10.1007/s00170-015-7436-0#page-1

► T.KEBABSA, N.OUELAA, : A.JEROME, M.C. DJAMAA, R.KHETTABI, A. DJEBALA: Experimental study of a turbo-alternator in industrial environment using cyclostationarity analysis.  The International Journal of Advanced Manufacturing Technology

ISSN: 0268-3768 (Print) 1433-3015 (Online). http://link.springer.com/article/10.1007/s00170-015-7083-5#page-1

► R.YOUNES, N.HAMZAOUI, N. OUELAA, DJEBALA: Perceptual study of the evolution of gear defects. Elsevier: doi:10.1016/ j.apacoust.2015.05.010. Applied Acoustics, Volume 99, 1 December 2015, Pages 60-67. http://www.sciencedirect.com/science/article/pii/S0003682X15001632

► M. KHECHANA, M. C. DJAMAA, A. DJEBALA, Z. BOUMAZZA: Identification of structural damage in the turning process of a disk based on the analysis of cutting force signals. The International Journal of Advanced Manufacturing Technology

September 2015, Volume 80, Issue 5-8, pp 1363-1368. http://link.springer.com/article/10.1007/s00170-015-7110-6#page-1

► L.BOUZID, M.A.YALLESE, K.CHAOUI, T.MABROUKI, L.,BOULANOUAR: Mathematical modeling for turning on AISI 420 stainless steel using surface response methodology. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture:  http://pib.sagepub.com/content/229/1/45.short 

► S.BERKANI, MA.YALLESE, L.BOULANOUAR, T.MABROUKI. Statistical analysis of AISI304 austenitic stainless steel machining using Ti(C, N)/Al2O3/TiN CVD coated carbide tool. International Journal of Industrial Engineering Computations.

International Journal of Industrial Engineering Computations. ISSN 1923-2934 (Online) - ISSN 1923-2926 (Print). Quarterly Publication- Volume 6 Issue 4 pp. 539-552 , 2015

► N.KRIBES, Z.HESSAINIA, MA.YALLESE : Optimisation of machining parameters in hard turning by desirability function analysis using response surface methodology.: http://link.springer.com/chapter/10.1007%2F978-3-319-17527-0_8#page-1

► I.MEDDOUR, MA.YALLESE, R.KHATTABI, M.ELBAH, L.BOULANOUAR: Investigation and modeling of cutting forces and surface roughness when hard turning of AISI 52100 steel with mixed ceramic tool: cutting conditions optimization. International Journal of Advanced Manufacturing Technology. http://link.springer.com/article/10.1007/s00170-014-6559-z#/page-1

► Z. HESSAINIA, MA. YALLESE, L.BOUZID,  T.MABROUKI . On the application of response surface methodology for predicting and optimizing surface. roughness and cutting forces in hard turning by PVD coated insert. International Journal of Industrial Engineering Computations. International Journal of Industrial Engineering Computations. ISSN 1923-2934 (Online) - ISSN 1923-2926 (Print). Quarterly Publication- Volume 6 Issue 2 pp. 267-284 , 2015

► B. FNIDES, H. AOUICI, M.ELBAH, S.BOUTABBA, L. BOULANOUAR: Comparison between mixed ceramic and reinforced ceramic tools in terms of cutting force components modelling and optimization when machining hardened steel AISI 4140 (60 HRC). Mechanics & Industry Volume 16, Number 6, 2015: http://www.mechanics-industry.org/articles/meca/abs/2015/06/mi140126/mi1...

► K.GHEDJATI, E.FLEURY, MS.HAMANI, K.BOUACHA, B.BOLLE: Elaboration of AlSi10Mg casting alloys using directional solidification processing.  International Journal of Minerals, Metallurgy and Materials: http://link.springer.com/article/10.1007/s12613-015-1100-4#page-1

► MOUASSA, Ahcene, BOUCHERIT, Hamid, BOU-SAÏD, Benyebka, et al. Steady-state behavior of finite compliant journal bearing using a piezoviscous polar fluid as lubricant. Mechanics & Industry, 2015, vol. 16, no 6, p. 608. http://www.mechanics-industry.org/articles/meca/abs/2015/06/mi140255/mi1...

► M. LAHMAR, B.BOU-SAID: Nonlinear Dynamic Response of an Unbalanced Flexible Rotor Supported by Elastic Bearings Lubricated with Piezo-Viscous Polar Fluids. Journal of Lubricants 3(2), 281-310; doi: 10.3390/lubricants3020281.  http://www.mdpi.com/2075-4442/3/2/281/htm

2014

►  M. K. BABOURI, N. OUELAA, A. DJEBALA.  Temporal and frequential analysis of the tools wear evolution. ISSN 1392-1207. MECHANIKA. 2014 Volume 20(2): 205-212: http://www.chemtech.ktu.lt/index.php/Mech/article/view/6933

►  R. YOUNES,  N. OUELAA, N. HAMZAOUI, A.  DJEBALA.  Experimental study of real gear transmission defects using sound perception. # Springer-Verlag London 2014.  DOI 10.1007/s00170-014-6313-6. http://link.springer.com/article/10.1007/s00170-014-6313-6#page-1

►  L. BOUZID, S. BOUTABBA, M. A. YALLESE,  S. BELHADI, F. GIRARDIN.  Simultaneous optimization of surface roughness and material removal rate for turning of X20Cr13 stainless steel.   Int J Adv Manuf Technol (2014) 74:879–891

http://www.link.springer.com/article/10.1007/s00170-014-6043-9#page-1

►  L. BOUZID, M.A. YALLESE, K.CHAOUI, T. MABROUKI, L. BOULANOUAR. Mathematical modeling for turning on AISI 420 stainless steel using surface response methodology. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture published online 24. April 2014. DOI: 10.1177/0954405414526385: http://pib.sagepub.com/content/early/2014/04/23/0954405414526385

►  L. BOUZID, M. A. YALLESE, S. BELHADI. RMS-based optimisation of surface roughness when turning AISI 420 stainless steel. 224 Int. J. Materials and Product Technology, Vol. 49, No. 4, 2014 -http://inderscience.metapress.com/content/604p3p1244v02830/

►  H. AOUICI & H. BOUCHELAGHEM & M. A. YALLESE & M. ELBAH &B. FNIDES. Machinability investigation in hard turning of AISI D3 cold work steel with ceramic tool using response surface methodology. DOI 10.1007/s00170-014-5950-0. Springer-Verlag London 2014.http://link.springer.com/content/pdf/10.1007/s00170-014-5950-0.pdf

►  K. BOUACHA, M. A. YALLESE, S. KHAMEL, S. BELHADI. Analysis and optimization of hard turning operation using cubic boron nitride tool. Int. Journal of Refractory Metals and Hard Materials 45 (2014) 160–178.  http://www.sciencedirect.com/science/article/pii/S0263436814000717

2013

►  R. KHETTABI, L. FATMI, J. MASOUNAVE, V. SONGMENE.  On the micro and nanoparticle emission during machining of titanium and alumunium alloys. Volume 6, Issue 3, 2013,   Pages 175–180.  http://www.sciencedirect.com/science/article/pii/S1755581713000345#

► A. BEZAZI, W. BOUKHAROUBA, F. SCARPA. Mechanical properties of auxetic carbon/epoxy  composites: static and cyclic fatigue behaviour. Physica status solidi (b), Volume 246, Issue 9,  Date:      September 2009, Pages: 2102-2110.   http://www3.interscience.wiley.com/journal/122574109/issue

► E. H. HARKATI, A. BEZAZI, W. BOUKHAROUBA, F. SCARPA. Influence of carbon fibre on the  through-the-thickness NPR behaviour of composite laminates. Physica status solidi (b), Volume 246,  Issue 9, Date: September 2009, Pages: 2111-2117. http://www3.interscience.wiley.com/journal/122574109/issue 

►  M. GUEBAILIA, N. OUELAA, J.L.GUYADER.  Solution of the free vibration equation of a multi span bridge deck by local estimation method. Volume 48, March 2013, Pages 695–703. http://www.sciencedirect.com/science/article/pii/S0141029612006177#

►  Z. HESSAINIAA, N.KRIBESL, M.A. YALLES, T. MABROUKI, N. OUELAA, J. –F. RIGAL. Turning roughness model based on tool-nose displacements. Issn 1392 - 1207. Mechanika. 2013 volume 19(1): 112-119. http://sace.ktu.lt/index.php/Mech/article/view/3612

► M.GUEBAILIA, N. OUELAA, J. L. GUYADER. Solution of the free vibration equation of a multi span bridge deck by local estimation method.EngStruct (2013),http://dx.doi.org/10.1016/j.engstruct.2012.12.004

►  H. AOUICI,  M A YALLESE,  A BELBAH,  M.F AMEUR,  M ELBAH. Experimental investigation of cutting parameters influence on surface roughness and cutting forces in hard turning of X38CrMoV5-1 with CBN tool. Sadhana June 2013, Volume 38, Issue 3, pp 429-445. http://link.springer.com/article/10.1007/s12046-013-0147-z

►  Z. HESSAINIAA, N.KRIBESL, M.A. YALLES, T. MABROUKI, N. OUELAA, J. –F. RIGAL. Turning roughness model based on tool-nose displacements. Issn 1392 - 1207. Mechanika. 2013 volume 19(1): 112-119. http://sace.ktu.lt/index.php/Mech/article/view/3612

► S.KHAMEL; N.OUELAA,  K.BOUACHA. Analysis and prediction of tool wear, surface roughness and cutting forces in hard turning with CBN tool. Journal of Mechanical Science & Technology;Nov 2012, Vol. 26 Issue 11, p3605. http:// www.connection.ebscohost.com/c/articles/83593608/analysis-prediction-tool-wear- surface-roughness-cutting-forces-hard-turning-cbn-tool

► NABIL, KRIBES; ZAHIA, HESSAINIA; YALLES, M. A.; OUELAA, N. Statistical analysis of surface roughness by design of experiments in hard turning. Mechanika; 2012, Vol. 18 Issue 5, p605: http://www.connection.ebscohost.com/c/articles/83723033/statistical-analysis-surface-roughness-by-design-experiments-hard-turning

► M.A.YALLESE, T.MABROUKI, J.F. RIGAL, Surface roughness and cutting forces modeling for optimization of machining Condition in finish hard turning of AISI52100 steel. Mohamed Walid Azizi, Salim Belhadi, Mohamed, Journal of Mechanical Science and Technology 26(12)(2012)4105~4114, Springer

► NABIL, KRIBES; ZAHIA, HESSAINIA; YALLES, A ;  Statistical analysis of surface roughness by design of experiments in hard turning Author(s):.; et al. Source: MECHANIKA  Issue: 5   Pages: 605-611   DOI: 10.5755/j01. mech.18.5.2704   Published: 2012

► H. AOUICI, M.A. YALLESE, K.CHAOUI, T.MABROUKI, J.F. RIGAL, Analysis of surface roughness and cutting force components in hard turning with CBN tool: prediction model and cutting conditions optimization, Measurement 45 (2012) 344–353

► B.FNIDES, S.BERKANI, M.A. YALLESE ,S.BOUTABBA, J.F.RIGAL , SALIM DAFFRI, Analysis  of  technological  parameters  through  response  surface  methodology  in  machining  hardened  X38CrMoV5-1  using  whisker  ceramic   tool  (Al2O3+SiC) , Journal of Engineering, (2012) 18, 1, 26–41, doi: 10.3176/eng.2012.1.03

► BRAHIM FNIDES, M A YALLESE, T MABROUKI AND J-F RIGAL, Application of response surface methodology for determining cutting force model in turning hardened AISI H11 hot work tool steel, Sadhana Vol. 36, Part 1, February (2011), pp. 109–123,  Springer.

► H.AOUICI, M.A.YALLESE, B.FNIDES, K.CHAOUI T.MABROUKI, Modeling and optimization of hard turning of X38CrMoV5-1 steel with CBN tool: Machining parameters effects on flank wear and surface roughness, Journal of Mechanical Science and Technology 25 (11) (2011) 1~9, Springer.

2012

► S.KHAMEL; N.OUELAA,  K.BOUACHA. Analysis and prediction of tool wear, surface roughness and cutting forces in hard turning with CBN tool. Journal of Mechanical Science & Technology;Nov 2012, Vol. 26 Issue 11, p3605. http:// www.connection.ebscohost.com/c/articles/83593608/analysis-prediction-tool-wear- surface-roughness-cutting-forces-hard-turning-cbn-tool

► NABIL, KRIBES; ZAHIA, HESSAINIA; YALLES, M. A.; OUELAA, N. Statistical analysis of surface roughness by design of experiments in hard turning. Mechanika; 2012, Vol. 18 Issue 5, p605: http://www.connection.ebscohost.com/c/articles/83723033/statistical-analysis-surface-roughness-by-design-experiments-hard-turning

► DJEBALA, A., OUELAA, N., BENCHAABANE, C., & LAEFER, D. 'Application of the Wavelet Multi-resolution Analysis and Hilbert Transform for the Prediction of Gear Tooth Defects'.Meccanica, October 2012, Volume 47, Issue 7, pp 1601-1612

http://www.link.springer.com/article/10.1007/s11012-012-9538-1/fulltext....

► A. REZAIGUIA, Y. FISLI, S. ELLAGOUNE, D.F. LAEFER AND N. OUELAA. Extension of a semi-analytical approach to determine natural frequencies and mode shapes of a multi-span orthotropic bridge deck. http://www.technopress.kaist.ac.kr/?page=container&journal=sem&volume=43...

► H. BOUCHERIT, ET M. LAHMAR, “ Etude Theorique Et Numerique Des Effets Combines De Non-Newtonien Et De La Piezoviscosite Du Lubrifiant Sur Les Performances Statiques D’un Palier Compliant ”, Matériaux & Techniques  100, 87-100 (2012),  EDP Sciences,2012, http://www.mattech-journal.org/ndex.php?ption=com_ orthcoming&Itemid=18&lang=fr.

► B. BOU-SAID, H. BOUCHERIT ET M. LAHMAR, “The Influence Lubricant Of Particle Concentration And Rheological Properties On Bearing Behavior “, Mechanics & Industry, EDP Sciences, 2012, Publié en Ligne le 29/01/2012, http:// www.mechanics-industry.org/action /displayJournal?jid=MIN.

► H. BENSOUILAH, M. LAHMAR, B. BOU-SAÏD, Elasto-aerodynamic lubrication analysis of a self-acting air foil journal bearing, Journal of Lubrication Science, John Wiley Editor, Vol. 24, Issue 3, pp. 95-128, 2012.  http://www.interscience.wiley.com

► BOUAKBA M., BEZAZI A., SCARPA F. FE analysis of the in-plane mechanical properties of a novel Voronoi-type lattice with positive and negative Poisson's ratio configurations. Accepted to appear in International Journal of Solids and Structures (2012).

2010

►H. AOUICI, M.A. YALLESE, B. FNIDES, T. MABROUKI , Machinability investigation in hard turning of AISI H11 hot  work steel with CBN, MECHANIKA. 2010. Nr.6(86)

► H.BOUCHELAGHEM, M.A.YALLESE, AMIRAT. A,  T.MABROUKI,  J.F.RIGAL.

Experimental investigation and performance analyses of CBN insert in hard turning of cold work tool steel (D3). Machining Science and Technology, Volume14, issue 4, (2010) pages 1-31, Taylor and Francis group, LLC, DOI: 10.1080/10910344.2010.533621

► K.BOUACHA; M.A.YALLESE; T.MABROUKI, J.F.RIGAL:

Satistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool , International Journal of Refractory Metals and Hard Materials, Volume 28, Issue 3, May 2010, Pages 349-361.

► M.  LAHMAR, S.  ELLAGOUNE, B.  BOU-SAÏD, Elastohydrodynamic lubrication analysis of a compliant journal bearing considering static and dynamic deformations of the bearing-liner, Journal of Tribology Transactions (American Society of Tribologists and Lubrication Engineers(STLE)), Vol. 53, Issue 3, (2010), pp.349-368, I.S.S.N 1040-2004. http:// www.stle.org

► H. BOUCHERIT, M. LAHMAR, B. BOU-SAÏD, J. TICHY, Comparison of non-Newtonian constitutive laws in hydrodynamic lubrication, Tribology Letters, Springer Netherlands, ISSN 1023-8883, (2010). http://www.springerlink.com

► A. MOUASSA, M. LAHMAR, B. BOU-SAÏD,Application of the homogenization method to study the combined effects of surface roughness and lubricant rheology on the behaviour of a hydrodynamic contact, Mécanique & Industries, (2010), EDP Sciences, Vol. 11; pp. 345-363; I.S.S.N 1296-2139: http://www.mecanique-industries.org

2009

► S. GUENFOUD, S.V. BOSAKOV, D.F. LAEFER. Dynamic analysis of a beam resting on an  elastic half-space with inertial properties. Soil  Dynamics and  Earthquake  Engineering, 2009, vol. 29,  pp. 1198-1207. http://www.elsevier.com/wps/find/journaldescription.cws_home/422924/description#description

► S. GUENFOUD, M.N. AMRANE, S.V. BOSAKOV, N. OUELAA. Semi-analytical evaluation of integral forms  associated with Lamb’s problem.  Soil Dynamics and Earthquake Engineering, 2009, vol. 29,  pp. 438- 443. http://www.elsevier.com/wps/find/journaldescription.cws_home/422924/description#description

► M. A YALLESE, K.CHAOUI, N.ZEGHIB, L.BOULANOUAR, J. F.RIGAL  Hard machining  of  hardened  bearing steel  using  cubic  boron   nitride tool.   Journal  of   materials  processing  technology  209,            (2009), pp. 1092–1104. http://www.elsevier.com/wps/product/cws_home/505656

► B.FNIDES , M.A.YALLESE ,T. MABROUKI, J. F.RIGAL , Surface roughness model in turning hardened hot work steel using mixed ceramic tool,  ISSN 1392 - 1207. mechanika. 2009. nr.3(77): http://zurnalas.mechanika.ktu.lt/?lang=2

2008

► ELLAGOUNE S., FATMI L., ROUILI A. Damage mechanism of a sandwich material tested under static  and  loadings in  three points bending  experiment. International  Review of Mechanical Engineering (I.R.E.M.E), Vol. 2, N.1. January 2008.  http://www.praiseworthyprize.com/IREME_vol_2_n_1.html#Data%20Mining

► M.C. DJAMAA, N. OUELAA, S. GUENFOUD, A. REZAIGUIA, C. PEZERAT, Prediction of multiple sources exciting a cylinder filled by a heavy fluid using inverse method.  Journal of Physics:    Conference Series Volume 135, Issue 1, N°012037, 2008.  http://www.iop.org/EJ/toc/1742-6596/135/1

► A. DJEBALA, N. OUELAA , N. HAMZAOUI, Detection of rolling bearing defects using discrete wavelet analysis. Meccanica, Vomule 43 N°3 (2008).      http://www.springerlink.com/content/h75q721057285458/

► FNIDES B, YALLESE M A, AOUICI H, Hard turning of hot work steel AISI h11: evaluation of  cutting  pressures resulting force and temperature , revue Mechanika, pp. 1392-1207, n° 4(72) 2008.    http://zurnalas.mechanika.ktu.lt/?lang=2

► FNIDES B., AOUICI H., YALLESE M. A., Cutting forces and surface roughness in hard turning  of hot work steel X38CrMoV5-1 using mixed ceramic, ISSN 1392 - 1207. Mechanika.   2008. nr.2(70).    http://zurnalas.mechanika.ktu.lt/?lang=2

► ELLAGOUNE S., FATMI L., ROUILI A. Damage mechanism of a sandwich material tested under static  and  loadings in  three points bending  experiment. International  Review of Mechanical Engineering (I.R.E.M.E), Vol. 2, N.1. January 2008.  http://www.praiseworthyprize.com/IREME_vol_2_n_1.html#Data%20Mining

► H. BOUCHERIT, M. LAHMAR, B. BOU-SAÏD, Misalignment effects on steady- state and dynamic  behaviour  of compliant journal bearings lubricated with couple-stress fluids,  Journal of Lubrication  Science, Vol. 20, (2008),  pp.  241-268, John Wiley Editor.          www.interscience.wiley.com

► M. LAHMAR, B. BOU-SAÏD, Couple-stresses effects on the dynamic behavior  of connecting-rod bearings in both gosoline and diesel engines,  Journal of Tribology Transactions  (American Society of   Tribologists  nd  Lubrication  Engineers (STLE)),  Vol.  51, Issue 1, (2008),  pp. 44-56, I.S.S.N   1040-2004.      www.stle.org/2007abstracts/admin/index_2007.cfm

► A. KABOUYA, M. LAHMAR BOU-said, Etude des paliers lisses mésalignés lubrifiés  par des fluides à couple de contrainte, Mécanique & Industries 8, pp.  577-595 (2008),  EDP Sciences, I.S.S.N 1296-2139,  http://www.mecanique-industries.org

2007

►KHAROUBI M., FATMI L., BERBAOUI R., BENMEDAKHENE, S. EL MAHI A. « Study of the  damage by acousticemission of two laminate composites subjected to various levels of loading in three points bending »Mechanika. 2007 m. Nr. 5(67).  http://internet.ktu.lt/en/science/journals/mech/mechtu67.html

► FATMI L., ROUILI A., HAMLAOUI N. « Cyclic loading effect on the mechanical behaviour and  morphology of the high density polyethylene » Mechanika. 2007 m. Nr. 5(67).  http://internet.ktu.lt/en/science/journals/mech/mechtu67.html

► BEY K, FATMI L. Effect of Different Cyclic Signals on Three-Points-Bendings  Behavior  of  a fibreglass  and  Epoxy   Resin   Composite   Materials.  International Review of  Mechanical.   Engineering  (I.R.E.M.E), Vol 1, N 2. March 2007.

► BOSAKOV S.V., GUENFOUD S., BOUHEMAME N., DJEBALA A.  Dynamical analysis of rectangular plate located on elastic foundation of Winkler’s type. Proceeding of the National Academy of Sciences of  Belarus, (Physic-Technical series: ISSN 0002-3566), 2007,   vol. 1, pp. 41-49. http://nasb.gov.by/eng/publications/vestift/index.php

► M.C.DJAMAA , OUELAA N., PEZERAT C. ET GUYADER J.L. Reconstruction of a distributed force    applied  on a  thin cylindrical  shell by  an  inverse  method  and  spatial  filtering. Journal of sound and vibration,  2007, Vol.301, N°3-5, pp.560-575. http://www.sciencedirect.com/science/journal/0022460X  ...       http://www.elsevier.com/locate/jsvi

►A.DJEBALA, N. OUELAA ,  N. HAMZAOUI, Optimisation de  l’analyse  multirésolution enondelettes des signaux de choc. Application aux signaux engendrés  par des   roulements  défectueux, Mécanique & Industries, Volume 8 N°4 (2007). http://www.mecanique-industries.org/index.php?option=article&access=stan...

► N.KRIBES, N.OUELAA, M.A.YALLESE , S.BELHADI , Analyse de l'impact des paramètres de coupe  et desvibrations sur la rugosité des pièces usinées en tournage à partir de la méthode de   régression linéaire multiple. Matériaux & Techniques N°95, pp.197-203 (2007). http://www.mattech-journal.org/index.php?option=article&access=standard&...

► N.KRIBES, N.OUELAA, M.A.YALLESE , S.BELHADI , Analyse de l'impact des paramètres de coupe  et desvibrations sur la rugosité des pièces usinées en tournage à partir de la méthode de   régression linéaire multiple. Matériaux & Techniques N°95, pp.197-203 (2007). http://www.mattech-journal.org/index.php?option=article&access=standard&...

► BOUCHELAGHEM H., YALLESE M. A,  MIRAT A, BELHADI S,  Wear  behaviour  of  CBN  tool when  turning  hardened AISI D3 steel, revue Mechanika, pp. 57-65, n° 3(65) 2007.     http://zurnalas.mechanika.ktu.lt/?lang=2

► M. LAHMAR, S. ELLAGOUNE, B. BOU-SAÏD,  Elastohydrodynamic lubrication  analysis  of a compliant journal bearing considering  static  and  dynamic  deformations  of the bearing-liner, à paraître dans Journal of Engineering Tribology, Proceedings  of  the Institution  of Mechanical  Engineers (IMechE) Part J, I.S.S.N 1350-6501.       www.pepublishing.com

► M. LAHMAR, S. ELLAGOUNE, B. BOU-SAÏD,  Elastohydrodynamic lubrication  analysis  of a compliant journal bearing considering  static  and  dynamic  deformations  of the bearing-liner, à paraître dans Journal of Engineering Tribology, Proceedings  of  the Institution  of Mechanical  Engineers (IMechE) Part J, I.S.S.N 1350-6501.   www.pepublishing.com