Communications internationales

2017

►A. Hadjab, L. Fatmi, N. Ouelaa, R. Khettabi. Analyse statique et modale des poutres sandwiches à âme en hérex c70 et peaux en teffetas. Le 4ème séminaire international sur les technologies mécaniques avancées STEMA2017 Tlemcen, Algérie2017. https://ft.univ-tlemcen.dz/en/evenements/67/stema-2017

►M.K. Babouri, N. Ouelaa, A. Djebala, M.C. Djamaa, S. Boucherit Experimental Study for Prediction of Tool Wear Using a Hybrid Method, Le 4ème séminaire international sur les technologies mécaniques avancées STEMA2017 Tlemcen, Algérie, 2017 https://ft.univ-tlemcen.dz/en/evenements/67/stema-2017

►M. Malim, M.C. Djamaa, M. Khechana, Méthode de fabrication par usinage des aubes de forme NACA sur machine CNC, 2ème édition du congrès international sur les ingénieries 2017, Marrakech, Maroc

►M. Guebailia, N. Ouelaa, Free Vibration of a Multi-span Road Bridge Supported by Point Elastic Supports.International Conference Design and Modeling of Mechanical Systems CMSM2017. 2017. http://www.la2mp.org/cmsm2017/PROGRAM_CMSM%202017.pdf

►M.W. Azizi, M. A. Yallese, O. Keblouti, A. Lagred, L. Boulanouar. Modeling and optimization of surface roughness in turning hardened steel. Congrès international sur les matériaux et la stabilité structurelle CMSS-2017, Novembre 2017,Rabat, Maroc.2017. http://fsr.um5.ac.ma/cmss17/fr/index.html

►A. Khellaf, M A Yallese, S. Boutabba, M.Habak, H. Aouici, S. Smaiah. Mathematical modeling and multi-objective optimization of technological parameters in hard turning operation using RSM and genetic algorithmic approach. Congrès Français de Mécanique, Septembre 2017, Lille, France.

https://cfm2017.sciencesconf.org/130745/document

►S. Belhadi, L. Bouzid, M A Yallese, M. Nouioua. Optimization by gray relational analysis and desirability function approach of AISI D3 steel turning with CBN tool. 2ème Congrès International sur les Ingénieries Civile, Mécanique et Electrique pour l’Energie –Novembre 2017, Marrakech.

►A. A. Selaimia, H. Bensouilah, M. A. Yallese, I. Meddour, S. Belhadi, T Mabrouki. Modeling of Austenitic Stainless Steel During Face Milling Using RMS. 2ème Congrès International sur les Ingénieries Civile, Mécanique et Electrique pour l’Energie –Novembre 2017, Marrakech

►H. Tebassi, S. Boucherit, M. A. Yallese, I. Meddour, S. Belhadi. RSM and ANN based models in turning process :Adequacy and precision benefit. 2ème Congrès International sur les Ingénieries Civile, Mécanique et Electrique pour l’Energie –Novembre 2017, Marrakech

►A.Laouissi, M.A. Yallese, A.Belbah, S.Belhadi, S.Boucherit, A. Benkhelladi. Modélisation et optimisation des paramètres de coupe lors du tournage de la fonte FGL250par la céramique en nitrure de silicium (Si3N4) non revêtue en utilisant l’approche ANN et la méthode PSO. 2ème Congrès International sur les Ingénieries Civile, Mécanique et Electrique pour l’Energie –Novembre 2017, Marrakech

►R. Saidi, B. Ben Fathallah, M. A. Yallese, T. Mabrouki. Effet des paramètres de coupe sur la qualité des surfaces usinées en alliage de cobalt. International Conference Design and Modeling of Mechanical Systems CMSM2017

2016

► R.YOUNES, N. OUELAA, N.HAMZAOUI, A.DJEBALA

Experimental study of combined gear and bearing faults by sound perception.

International Conference on Advances in Mechanical, Industrial and Mechatronics Engineering. August 25-26, (ICAMIME 2016).

► M.C. DJAMAA, M.KHECHANA, S.BOUCHERIT.

Application of short-term fractional Fourier transform to identify both chatter and structural damage from cutting force signals.

International Conference on Advances in Mechanical, Industrial and Mechatronics Engineering. August 25-26, (ICAMIME 2016).

2015

► K.BOUACHA, S.KHAMEL, S.BELHADI

CBN tool wear and surface roughness optimization using RSM and NSGA-II methodologies, International Wear behavior investigation using Pin-On-Disk test.

InternationalConference on Advances in Mechanical Engineering, Yildiz Technical University, Istanbul, Turkey. May 2015 (ICAME'15).

►K.BOUACHA, S.KHAMEL, S.BELHADI

Modeling and optimization of cutting forces and CBN tool wear behavior in hard turning, InternationalConference on Advances in Mechanical Engineering, Yildiz Technical University, Istanbul, Turkey. May 2015 (ICAME'15

► K.BOUACHA, S.KHAMEL, S.BELHADI

Modeling and optimization of cutting forces and CBN tool wear behavior in hard turning, InternationalConference on Advances in Mechanical Engineering, Yildiz Technical University, Istanbul, Turkey. May 2015 (ICAME'15

► K.BOUACHA, S.KHAMEL, S.BELHADI

Surface roughness improvement using response surface methodology in hard turning with CBN tool. InternationalConference on Advances in Mechanical Engineering, Yildiz Technical University, Istanbul, Turkey. May 2015 (ICAME'15).

► K.BOUACHA, M.S. BENABBOUD, S.KHAMEL, H.ATEEQ,

Wear behavior investigation using Pin-On-Disk test. InternationalConference on Advances in Mechanical Engineering, Yildiz Technical University, Istanbul, Turkey. May 2015 (ICAME'15).

►S.KHAMEL, N.OUELAA, K.BOUACHA

Analysis and modeling of hard turning behaviour using ANN and RSM methodologies. InternationalConference on Advances in Mechanical Engineering, Yildiz Technical University, Istanbul, Turkey. May 2015 (ICAME'15

► S. KHAMEL, N. OUELAA, K.BOUACHA

A proposed approach for the classification of tool wear via artificial intelligence. InternationalConference on Advances in Mechanical Engineering, Yildiz Technical University, Istanbul, Turkey. May 2015 (ICAME'15

►A.DJEBALA, M.K. BABOURI

Méthode hybride pour la détection des défauts de dentures d’engrenages basée sur l’Analyse Multi-Résolution en Ondelettes et la transformée de Hilbert.

12èmeCongrèsde Mécanique, Casablanca Maroc, du 21 au 24 Avril 2015.

►A.DJEBALA, N.OUELAA, M.K.BABOURI

Optimization of a maintenance policy in industrial field: Case study. Design and Modeling of Mechanical Systems. Congrès édité: Lecture Notes in Mechanical Engineering, DOI: 10.1007/ 978-3-319-17527-0_17. 2015

►M.K BABOURI, N.OUELAA, A.DJEBALA, M.C.DJAMAA, S.BOUCHERIT

Prédiction de la durée de vie optimale des outils de coupe basée sur les indicateurs scalaires et l’analyse multirésolution en ondelettes.