2018

► Zerti, Abderrahmen, et al. "Modeling and multi-objective optimization for minimizing surface roughness, cutting force, and power, and maximizing productivity for tempered stainless steel AISI 420 in turning operations." The International Journal of Advanced Manufacturing Technology (2019): 1-23. https://link.springer.com/article/10.1007/s00170-018-2984-8

► 

2017

► NOUIOUA, Mourad, YALLESE, Mohamed Athmane, KHETTABI, Riad, et al. Investigation of the performance of the MQL, dry, and wet turning by response surface methodology (RSM) and artificial neural network (ANN). The International Journal of Advanced Manufacturing Technology, 2017, vol. 93, no 5-8, p. 2485-2504. https://www.scopus.com/authid/detail.uri?authorId=16641654800

► AOUICI, H., KHELLAF, A., SMAIAH, S., et al. Comparative assessment of coated and uncoated ceramic tools on cutting force components and tool wear in hard turning of AISI H11 steel using Taguchi plan and RMS. Sādhanā, 2017, vol. 42, no 12, p. 2157-2170. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►HAMLAOUI, N., AZZOUZ, S., CHAOUI, K., et al. Machining of tough polyethylene pipe material: Surface roughness and cutting temperature optimization. The International Journal of Advanced Manufacturing Technology, 2017, vol. 92, no 5-8, p. 2231-2245. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►SELAIMIA, Abdel-Ali, YALLESE, Mohamed Athmane, BENSOUILAH, Hamza, et al. Modeling and optimization in dry face milling of X2CrNi18-9 austenitic stainless steel using RMS and desirability approach. Measurement, 2017, vol. 107, p. 53-67. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►NOUIOUA, Mourad, YALLESE, Mohamed Athmane, KHETTABI, Riad, et al. Comparative assessment of cooling conditions, including MQL technology on machining factors in an environmentally friendly approach. The International Journal of Advanced Manufacturing Technology, 2017, p. 1-16. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►TEBASSI, Hamid, YALLESE, Mohamed Athmane, BELHADI, Salim, et al. Quality-productivity decision making when turning of Inconel 718 aerospace alloy: A response surface methodology approach. International Journal of Industrial Engineering Computations, 2017, vol. 8, no 3, p. 347-362. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►CHABBI, A., YALLESE, M. A., NOUIOUA, M., et al. Modeling and optimization of turning process parameters during the cutting of polymer (POM C) based on RSM, ANN, and DF methods. The International Journal of Advanced Manufacturing Technology, 2017, vol. 91, no 5-8, p. 2267-2290. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►ZERTI, Oussama, YALLESE, Mohamed Athmane, KHETTABI, Riad, et al. Design optimization for minimum technological parameters when dry turning of AISI D3 steel using Taguchi method. The International Journal of Advanced Manufacturing Technology, 2017, vol. 89, no 5-8, p. 1915-1934. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►BENLAHMIDI, S., AOUICI, H., BOUTAGHANE, F., et al. Design optimization of cutting parameters when turning hardened AISI H11 steel (50 HRC) with CBN7020 tools. The International Journal of Advanced Manufacturing Technology, 2017, vol. 89, no 1-4, p. 803-820. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►KHELLAF, A., AOUICI, H., SMAIAH, S., et al. Comparative assessment of two ceramic cutting tools on surface roughness in hard turning of AISI H11 steel: including 2D and 3D surface topography. The International Journal of Advanced Manufacturing Technology, 2017, vol. 89, no 1-4, p. 333-354. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►KEBLOUTI, Ouahid, BOULANOUAR, Lakhdar, AZIZI, Mohamed Walid, YALLESE M.A. Effects of coating material and cutting parameters on the surface roughness and cutting forces in dry turning of AISI 52100 steel. Structural Engineering and Mechanics, 2017, vol. 61, no 4, p. 519-526. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►KEBLOUTI, Ouahid, BOULANOUAR, Lakhdar, AZIZI, M., YALLESE M.A.Modeling and multi-objective optimization of surface roughness and productivity in dry turning of AISI 52100 steel using (TiCN-TiN) coating cermet tools. International Journal of Industrial Engineering Computations, 2017, vol. 8, no 1, p. 71-84. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►BOUZID, Lakhdar, YALLESE, Mohamed Athmane, BELHADI, Salim, et al. Tool Life Evaluation of Cutting Materials in Turning of X20Cr13 Stainless Steel. In : Applied Mechanics, Behavior of Materials, and Engineering Systems. Springer International Publishing, 2017. p. 447-452. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►ZERTI, Oussama, YALLESE, Mohamed Athmane, BELHADI, Salim, and BOUZID Lakhdar. Taguchi Design of Experiments for Optimization and Modeling of Surface Roughness When Dry Turning X210Cr12 Steel. In : Applied Mechanics, Behavior of Materials, and Engineering Systems. Springer International Publishing, 2017. p. 275-288. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►TEBASSI, Hamid, YALLESE, Mohamed Athmane, MEDDOUR, Ikhlas, et al. On the Modeling of Surface Roughness and Cutting Force when Turning of Inconel 718 Using Artificial Neural Network and Response Surface Methodology: Accuracy and Benefit. Periodica Polytechnica. Engineering. Mechanical Engineering, 2017, vol. 61, no 1, p. 1. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►FNIDES, Mohamed, YALLESE, M., KHATTABI, Riad, et al.Modeling and optimization of surface roughness and productivity thru RSM in face milling of AISI 1040 steel using coated carbide inserts. International Journal of Industrial Engineering Computations, 2017, vol. 8, no 4, p. 493-512. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►CHABBI, Amel, YALLESE, Mohamed Athmane, MEDDOUR, Ikhlas, et al. Predictive modeling and multi-response optimization of technological parameters in turning of Polyoxymethylene polymer (POM C) using RSM and desirability function. Measurement, 2017, vol. 95, p. 99-115. https://www.scopus.com/authid/detail.uri?authorId=16641654800

►SAIL, K., AOUICI, H., HASSANI, S., et al. Influence of tribological parameters on S335 steel filing Ti–W–N in dry sliding wear: Prediction model and sliding condition optimization. The International Journal of Advanced Manufacturing Technology, 2017, vol. 92, no 9-12, p. 4057-4071. https://www.scopus.com/authid/detail.uri?authorId=24176841200

►AMEUR, M. F., HABAK, M., KENANE, M., AOUICI, Het al. Machinability analysis of dry drilling of carbon/epoxy composites: cases of exit delamination and cylindricity error. The International Journal of Advanced Manufacturing Technology, 2017, vol. 88, no 9-12, p. 2557-2571. https://www.scopus.com/authid/detail.uri?authorId=24176841200

►KHOUALDIA, Tarek, HADJADJ, Aoul Elias, BOUACHA, Khaider, et al. Multi-objective optimization of ANN fault diagnosis model for rotating machinery using grey rational analysis in Taguchi method. The International Journal of Advanced Manufacturing Technology, 2017, vol. 89, no 9-12, p. 3009-3020. https://www.scopus.com/authid/detail.uri?authorId=35232647200

►KHELLAF, Ahmed, YALLESE, Mohamed, BOUTABBA, Smail, et al. Mathematical modeling and multi-objective optimization of technological parameters in Hard Turning operation using RSM and Genetic Algorithmic Approach. S1-Procédés de fabrication et mise en forme par grandes déformations, 2017. http://documents.irevues.inist.fr/handle/2042/63108

►NOUIOUA, M., YALLESE, M. A., KHETTABI, R., et al.Optimization of Machining Process During Turning of X210Cr12 Steel Under MQL Cooling as a Key Factor in Clean Production. In : International Conference Design and Modeling of Mechanical Systems. Springer, Cham, 2017. p. 855-863. https://link.springer.com/chapter/10.1007/978-3-319-66697-6_83

 

2016

►FNIDES, Brahim, YALLESE, Mohamed Athmane, MABROUKI, Tarek, et al. Surface roughness model in turning hardened hot work steel using mixed ceramic tool. Mechanics, 2016, vol. 77, no 3, p. 68-73.

►BENSOUILAH, Hamza, AOUICI, Hamdi, MEDDOUR, Ikhlas, YALLESE, Mohamed Athmane, et al. Performance of coated and uncoated mixed ceramic tools in hard turning process. Measurement, 2016, vol. 82, p. 1-18.

►BELHADI, Salim, KADDECHE, Mounia., CHAOUI, Kamel and  YALLESE, Mohamed Athmane. Machining Optimization of HDPE Pipe Using the Taguchi Method and Grey Relational Analysis. International Polymer Processing, 2016, vol. 31, no 4, p. 491-502.

►TEBASSI, Hamid, YALLESE, Mohamed Athmane, MEDDOUR, Ikhlas, et al. On the Modeling of Surface Roughness and Cutting Force when Turning of Inconel 718 Using Artificial Neural Network and Response Surface Methodology: Accuracy and Benefit. Periodica Polytechnica Mechanical Engineering, 2016, vol. 61, no 1, p. 1-11.

►ZERTI, Oussama, YALLESE, Mohamed Athmane, KHETTABI, Riad, et al. Design optimization for minimum technological parameters when dry turning of AISI D3 steel using Taguchi method. The International Journal of Advanced Manufacturing Technology, 2016, p. 1-20.

►ELBAH, Mohamed, AOUICI, Hamdi, MEDDOUR, Ikhas, YALLESE, Mohamed Athmane, et al. Application of response surface methodology in describing the performance of mixed ceramic tool when turning AISI 4140 steel. Mechanics & Industry, 2016, vol. 17, no 3, p. 309.

2015

► L.BOUZID, M.A.YALLESE, K.CHAOUI, T.MABROUKI, L.,BOULANOUAR

Mathematical modeling for turning on AISI 420 stainless steel using surface response methodology. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

http://pib.sagepub.com/content/229/1/45.short 

► S.BERKANI, MA.YALLESE, L.BOULANOUAR, T.MABROUKI

Statistical analysis of AISI304 austenitic stainless steel machining using Ti(C, N)/Al2O3/TiN CVD coated carbide tool. International Journal of Industrial Engineering Computations.

International Journal of Industrial Engineering Computations

ISSN 1923-2934 (Online) - ISSN 1923-2926 (Print)

Quarterly Publication- Volume 6 Issue 4 pp. 539-552 , 2015

► N.KRIBES, Z.HESSAINIA, MA.YALLESE 

Optimisation of machining parameters in hard turning by desirability function analysis using response surface methodology.

http://link.springer.com/chapter/10.1007%2F978-3-319-17527-0_8#page-1

► I.MEDDOUR, MA.YALLESE, R.KHATTABI, M.ELBAH, L.BOULANOUAR

Investigation and modeling of cutting forces and surface roughness when hard turning of AISI 52100 steel with mixed ceramic tool: cutting conditions optimization. International Journal of Advanced Manufacturing Technology

http://link.springer.com/article/10.1007/s00170-014-6559-z#/page-1

► Z. HESSAINIA, MA. YALLESE, L.BOUZID,  T.MABROUKI 

On the application of response surface methodology for predicting and optimizing surface

roughness and cutting forces in hard turning by PVD coated insert. International Journal of Industrial Engineering Computations.

International Journal of Industrial Engineering Computations

ISSN 1923-2934 (Online) - ISSN 1923-2926 (Print)

Quarterly Publication- Volume 6 Issue 2 pp. 267-284 , 2015

► B. FNIDES, H. AOUICI, M.ELBAH, S.BOUTABBA, L. BOULANOUAR

Comparison between mixed ceramic and reinforced ceramic tools in terms of cutting force components modelling and optimization when machining hardened steel AISI 4140 (60 HRC). Mechanics & Industry Volume 16, Number 6, 2015

http://www.mechanics-industry.org/articles/meca/abs/2015/06/mi140126/mi1...

► K.GHEDJATI, E.FLEURY, MS.HAMANI, K.BOUACHA, B.BOLLE

Elaboration of AlSi10Mg casting alloys using directional solidification processing.  International Journal of Minerals, Metallurgy and Materials

http://link.springer.com/article/10.1007/s12613-015-1100-4#page-1

2014

►  L. BOUZID, S. BOUTABBA, M. A. YALLESE,  S. BELHADI, F. GIRARDIN.  Simultaneous optimization of surface roughness and material removal rate for turning of X20Cr13 stainless steel.   Int J Adv Manuf Technol (2014) 74:879–891

http://www.link.springer.com/article/10.1007/s00170-014-6043-9#page-1

►  L. BOUZID, M.A. YALLESE, K.CHAOUI, T. MABROUKI, L. BOULANOUAR. Mathematical modeling for turning on AISI 420 stainless steel using surface response methodology. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture published online 24. April 2014. DOI: 10.1177/0954405414526385

http://pib.sagepub.com/content/early/2014/04/23/0954405414526385

►  L. BOUZID, M. A. YALLESE, S. BELHADI. RMS-based optimisation of surface roughness when turning AISI 420 stainless steel. 224 Int. J. Materials and Product Technology, Vol. 49, No. 4, 2014 -http://inderscience.metapress.com/content/604p3p1244v02830/

►  H. AOUICI & H. BOUCHELAGHEM & M. A. YALLESE & M. ELBAH &B. FNIDES. Machinability investigation in hard turning of AISI D3 cold work steel with ceramic tool using response surface methodology. DOI 10.1007/s00170-014-5950-0. Springer-Verlag London 2014.http://link.springer.com/content/pdf/10.1007/s00170-014-5950-0.pdf

►  K. BOUACHA, M. A. YALLESE, S. KHAMEL, S. BELHADI. Analysis and optimization of hard turning operation using cubic boron nitride tool. Int. Journal of Refractory Metals and Hard Materials 45 (2014) 160–178.  http://www.sciencedirect.com/science/article/pii/S0263436814000717

2013

►  H. AOUICI,  M A YALLESE,  A BELBAH,  M.F AMEUR,  M ELBAH. Experimental investigation of cutting parameters influence on surface roughness and cutting forces in hard turning of X38CrMoV5-1 with CBN tool. Sadhana June 2013, Volume 38, Issue 3, pp 429-445.

http://link.springer.com/article/10.1007/s12046-013-0147-z

►  Z. HESSAINIAA, N.KRIBESL, M.A. YALLES, T. MABROUKI, N. OUELAA, J. –F. RIGAL. Turning roughness model based on tool-nose displacements. Issn 1392 - 1207. Mechanika. 2013 volume 19(1): 112-119.

http://sace.ktu.lt/index.php/Mech/article/view/3612

► S.KHAMEL; N.OUELAA,  K.BOUACHA. Analysis and prediction of tool wear, surface roughness and cutting forces in hard turning with CBN tool. Journal of Mechanical Science & Technology;Nov 2012, Vol. 26 Issue 11, p3605.

http:// www.connection.ebscohost.com/c/articles/83593608/analysis-prediction-tool-wear-       surface-roughness-cutting-forces-hard-turning-cbn-tool

► NABIL, KRIBES; ZAHIA, HESSAINIA; YALLES, M. A.; OUELAA, N. Statistical analysis of surface roughness by design of experiments in hard turning. Mechanika; 2012, Vol. 18 Issue 5, p605

http://www.connection.ebscohost.com/c/articles/83723033/statistical-analysis-surface-roughness-by-design-experiments-hard-turning

► M.A.YALLESE, T.MABROUKI, J.F. RIGAL, Surface roughness and cutting forces modeling for optimization of machining Condition in finish hard turning of AISI52100 steel. Mohamed Walid Azizi, Salim Belhadi, Mohamed,

Journal of Mechanical Science and Technology 26(12)(2012)4105~4114, Springer

► NABIL, KRIBES; ZAHIA, HESSAINIA; YALLES, A ;  Statistical analysis of surface roughness by design of experiments in hard turning Author(s):.; et al. Source: MECHANIKA  Issue: 5   Pages: 605-611   DOI: 10.5755/j01. mech.18.5.2704   Published: 2012

► H. AOUICI, M.A. YALLESE, K.CHAOUI, T.MABROUKI, J.F. RIGAL, Analysis of surface roughness and cutting force components in hard turning with CBN tool: prediction model and cutting conditions optimization, Measurement 45 (2012) 344–353

► B.FNIDES, S.BERKANI, M.A. YALLESE ,S.BOUTABBA, J.F.RIGAL , SALIM DAFFRI, Analysis  of  technological  parameters  through  response  surface  methodology  in  machining  hardened  X38CrMoV5-1  using  whisker  ceramic   tool  (Al2O3+SiC) , Journal of Engineering, (2012) 18, 1, 26–41, doi: 10.3176/eng.2012.1.03

► BRAHIM FNIDES, M A YALLESE, T MABROUKI AND J-F RIGAL, Application of response surface methodology for determining cutting force model in turning hardened AISI H11 hot work tool steel, Sadhana Vol. 36, Part 1, February (2011), pp. 109–123,  Springer.

► H.AOUICI, M.A.YALLESE, B.FNIDES, K.CHAOUI T.MABROUKI, Modeling and optimization of hard turning of X38CrMoV5-1 steel with CBN tool: Machining parameters effects on flank wear and surface roughness, Journal of Mechanical Science and Technology 25 (11) (2011) 1~9, Springer.

2011

2010

►H. AOUICI, M.A. YALLESE, B. FNIDES, T. MABROUKI , Machinability investigation in hard turning of AISI H11 hot  work steel with CBN, MECHANIKA. 2010. Nr.6(86)

► H.BOUCHELAGHEM, M.A.YALLESE, AMIRAT. A,  T.MABROUKI,  J.F.RIGAL.

Experimental investigation and performance analyses of CBN insert in hard turning of cold work tool steel (D3). Machining Science and Technology, Volume14, issue 4, (2010) pages 1-31, Taylor and Francis group, LLC, DOI: 10.1080/10910344.2010.533621

► K.BOUACHA; M.A.YALLESE; T.MABROUKI, J.F.RIGAL:

Satistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool , International Journal of Refractory Metals and Hard Materials, Volume 28, Issue 3, May 2010, Pages 349-361.

2009

► M. A YALLESE, K.CHAOUI, N.ZEGHIB, L.BOULANOUAR, J. F.RIGAL  Hard machining  of  hardened  bearing steel  using  cubic  boron   nitride tool.   Journal  of   materials  processing  technology  209,            (2009), pp. 1092–1104. http://www.elsevier.com/wps/product/cws_home/505656

► B.FNIDES , M.A.YALLESE ,T. MABROUKI, J. F.RIGAL , Surface roughness model in turning hardened hot work steel using mixed ceramic tool,  ISSN 1392 - 1207. mechanika. 2009. nr.3(77)

http://zurnalas.mechanika.ktu.lt/?lang=2

2008

► FNIDES B, YALLESE M A, AOUICI H, Hard turning of hot work steel AISI h11: evaluation of  cutting  pressures resulting force and temperature , revue Mechanika, pp. 1392-1207, n° 4(72) 2008.

   http://zurnalas.mechanika.ktu.lt/?lang=2

► FNIDES B., AOUICI H., YALLESE M. A., Cutting forces and surface roughness in hard turning  of hot work steel X38CrMoV5-1 using mixed ceramic, ISSN 1392 - 1207. Mechanika.   2008. nr.2(70)

     http://zurnalas.mechanika.ktu.lt/?lang=2

2007

► N.KRIBES, N.OUELAA, M.A.YALLESE , S.BELHADI , Analyse de l'impact des paramètres de coupe  et desvibrations sur la rugosité des pièces usinées en tournage à partir de la méthode de   régression linéaire multiple. Matériaux & Techniques N°95, pp.197-203 (2007). http://www.mattech-journal.org/index.php?option=article&access=standard&...

► BOUCHELAGHEM H., YALLESE M. A,  MIRAT A, BELHADI S,  Wear  behaviour  of  CBN  tool when  turning  hardened AISI D3 steel, revue Mechanika, pp. 57-65, n° 3(65) 2007.

    http://zurnalas.mechanika.ktu.lt/?lang=2